How many mg is a CC?

[Ian512]

I know this is a newb question and I tried looking in the other pages but no luck. How many mg's is 1 cc of test C?

[Bast]

Depends on who makes it and at what strength per cc they make it. Usually 200mg/cc

[TREN.PIMP]

I know this is a newb question and I tried looking in the other pages but no luck. How many mg's is 1 cc of test C?

1 cc = 1 mil of oil
your dose will depend on the brand of test you are using
test c is usually 200mg per 1 cc of oil
understand?

[Ian512]

Yes I understand. Unfortunatly I don't have/know the ratio because a friend of a friend is buying it. Would it be safe to assume (yes I might be making an ass of myself) that I could stick 1cc twice a week for 10wk? He did mention that the guy who was making the stuff made his living by doing so, which makes me think he knows his shit and that he would follow a protocal like 200mg per cc.

[ROCKNROLLA]

You don't sound too sure of yourself mate, just saying. But never assume, its important you know everything about whatever you put in your body but 1cc twice per week would 'typically' mean 400mg per week (If the test C dose is 200mg per ml/cc)

400mg = Pin 1ml (1cc) on MON and 1ml THUR
600mg = Pin 1ml (1cc) on MON, 1ml WED and 1ml FRI

Just my opinion but keep up the researching before you start sticking anything in

[Ian512]

Your right I'm not to sure at this point. I only found out a couple mins ago that my friend would be able to get his hands on some. He said that the guy told him something about 1cc a week(which sounds like it's not enough). But I know for a fact that the guy who hooked him up who claims to be experienced and runs newbish cycles but he doesn't know his AAS shit. I asked my friend to find out the mg to ml ratio's so I could ask ya'll. Thanks for the quick replies. Might be a wile before my friend gets back to me on that...

[ROCKNROLLA]

Just be sure mate, would hate to see anyone end up with fake gear on their first cycle is all.

[fugazee]

I saw this a while ago, hope this helps

mg is a measurement of weight.
CC is a measure of volume.

If you have gear that is 250mg/ml, that means:
For every ml (or 1 CC) you will get 250mg of ______.

[TheMilkMan]

Even if the guys is making it (which wouldn't surprise me because most UGL gear is made just like that, by your average joe homebrewer) he should put some sort of label on it indicating the mg/ml ratio. If it's test cyp, you're generally going to find that it is dosed at 200mg/ml or 250mg/ml. Assuming it is dosed properly, go with what the label says and dose accordingly.

[Ian512]

Even if the guys is making it (which wouldn't surprise me because most UGL gear is made just like that, by your average joe homebrewer) he should put some sort of label on it indicating the mg/ml ratio. If it's test cyp, you're generally going to find that it is dosed at 200mg/ml or 250mg/ml. Assuming it is dosed properly, go with what the label says and dose accordingly.

Your absolutely right Milk, I don't know why that didn't occur to me....Anyways since I've already started this thread I figured I'd go ahead and ask this question as well. Given ya'lls experience about how long does a 10mL vial last? From my experience searching around on the web it seems that almost everything is sold in 10mL vials or smaller. Granted most AAS are dosed at either 250mg or 300mg per mL about how long/how many injections does that last for?

[TREN.PIMP]

Your absolutely right Milk, I don't know why that didn't occur to me....Anyways since I've already started this thread I figured I'd go ahead and ask this question as well. Given ya'lls experience about how long does a 10mL vial last? From my experience searching around on the web it seems that almost everything is sold in 10mL vials or smaller. Granted most AAS are dosed at either 250mg or 300mg per mL about how long/how many injections does that last for?

Man you really have a LONGGG way to go id say that you lack major knowledge in aas and suggest that you pick up an anabolics book by william llewellyn and read the profiles on roids front 2 back many times over @ the very least ..imo its better that you stick 2 creatine and avoid roids cause its not something 2 fuk with half assed and lacking major knowledge cause you will only waste your money time and the juice

[Ian512]

Man you really have a LONGGG way to go id say that you lack major knowledge in aas and suggest that you pick up an anabolics book by william llewellyn and read the profiles on roids front 2 back many times over @ the very least ..imo its better that you stick 2 creatine and avoid roids cause its not something 2 fuk with half assed and lacking major knowledge cause you will only waste your money time and the juice

In most respects your right. I've been around the site for 4 months now and I've learned alot. I've done alot of reading, posting, and more reading, did I forget to mention reading? At this point my feeling is that the only knowledge I'm lacking is the kind you can only learn first hand, and when I say first hand I mean by doing. I'm sure some people would disagree with that. If thats the case, please point me in the direction of what ever information you think I need to know, I'm more than willing to learn more.

[TheMilkMan]

Anyways since I've already started this thread I figured I'd go ahead and ask this question as well. Given ya'lls experience about how long does a 10mL vial last?

That's based on so many potential factors. It's all dose dependent. For example, right now I'm using test 250mg/ml @ 750mg/wk. That means that I get 3 weeks and 1/3 of an injection each vial. If I was only running 250mg/wk it would last me 10 weeks, but if I was running 1250mg/wk it would only last me 2 weeks.

This is how I figure out how much I need. I'll use my current cycle as an example:

16 weeks @ 750mg/wk = 12,000mg total
2,500mg are in each vial (250mg/ml 10ml)

12,000/2,500 = 4.8 vials... That would mean 5 vials are needed.

Hope this helps.

[Ian512]

That means that I get 3 weeks and 1/3 of an injection each vial.
Hope this helps.

Yes that does help, but that one part does not make sense to me. I'm really confused about that sentence, can you clarify for me?

[sikwitr6r]

I want to get this straight before i do it. I'm not that great with numbers. I'll give you the break down. I'm about to do a test/deca cycle (test sustanon) I want to know how much to draw in the needle. Now its 350mg for 500ml. I want to do 250mg every 4 days. The needles i have 3ml (22 gauge).

On the needle theres obvioulsy markers where to draw the fluid to. Where would i draw it to?

i

[huuuge]

I want to get this straight before i do it. I'm not that great with numbers. I'll give you the break down. I'm about to do a test/deca cycle (test sustanon) I want to know how much to draw in the needle. Now its 350mg for 500ml. I want to do 250mg every 4 days. The needles i have 3ml (22 gauge).

On the needle theres obvioulsy markers where to draw the fluid to. Where would i draw it to?

i

I think you've wrote that bit wrong. Do you mean 350mg/ml??

If it is 350mg/ml, then... If your syringe is 3ml, means you should have 30increments on it. ~If so, you would need to go to the 7th increment. 0.7ml.

350/10 (which is 1ml, 10 increments) = 35 (mg per 1 increment)

250/35 = 7.14

7.14 x 35 = 250. If you go to the 7th increment you will be gettin 245mg

[navycron]

That's based on so many potential factors. It's all dose dependent. For example, right now I'm using test 250mg/ml @ 750mg/wk. That means that I get 3 weeks and 1/3 of an injection each vial. If I was only running 250mg/wk it would last me 10 weeks, but if I was running 1250mg/wk it would only last me 2 weeks.

This is how I figure out how much I need. I'll use my current cycle as an example:

16 weeks @ 750mg/wk = 12,000mg total
2,500mg are in each vial (250mg/ml 10ml)

12,000/2,500 = 4.8 vials... That would mean 5 vials are needed.

Hope this helps.

That was informative and well layed out man. I always notice that test cyp or test enanthate are never below 250 mg. Dunno.

[Newtobuilding]

Hi, I am about to start a cycle of boldenone undecylenate that is 100mg/ml. According to what I have read The optimal dosage is between 400-600mg per week. I will be using a 3ml syringe. If I wanted to take 600mg per week where would I measure the fluid to? I was guessing 1cc but I wanted to ask everyone first. Thanks for your help!

[Newtobuilding]

Also I got this from a friend and would like to be able to acquire my own doses in the future. Could someone give me or point me in the right direction of a reputable source for future purchases. Also I am in the US so I am not sure if that makes a difference. Thank you for your help!

[dfeaton]

Hi, I am about to start a cycle of boldenone undecylenate that is 100mg/ml. According to what I have read The optimal dosage is between 400-600mg per week. I will be using a 3ml syringe. If I wanted to take 600mg per week where would I measure the fluid to? I was guessing 1cc but I wanted to ask everyone first. Thanks for your help!

If your gear is only 100mg/ml & you want to take 600mg. You would need to take 6ml/cc a week.

As for a source.....research the forums here. Asking for a source here is a sure way to piss peeps off...read rules of forum.

[Newtobuilding]

Thanks for the help dfeaton. Sorry for askin about the sources I will check out the forum rules.

[Deen54]

1ml=1cc
10ml=10cc's

your dose- depends on product
(eg.. 250mg/ml)

means in 1ml or 1cc there is 250mg

that means 1ml or 1cc= 250mg

If your vial is 10ml that is = to 10cc's

therefore 10 shots.